The taste and grade of the bathroom are greatly improved because of the stone. In addition to walls, floors and countertops, the combination of bathtub and stone makes bathers intoxicated. Today, the editor of Fabulous Group came to talk with you about several craftsmanships of bathtub bag stone.
Process 1: The joint part of the bathtub and the stone is flattened according to the bathtub and the stone.
Process flow: setting out → brick wall masonry → cement sand paddle painting → bathtub installation → stone installation → board seam treatment
Process standard description:
(1). The joint between the bathtub and the stone shall be constructed according to the method of making the bathtub and the stone flat, and the joint between the stone and the bathtub shall be closed with weather-resistant glue 2mm.
(2). A hidden stone inspection door is left on the side. The size and direction of the inspection door must meet the inspection requirements
(3) When the stone countertop is a whole piece of stone, the hollow and edging must be cut according to the size of the bathtub during factory processing, and the actual transportation conditions on site and the protection of the finished product during transportation must be considered
Process 2: The construction process of pressing the stone on the edge of the bathtub at the junction of the bathtub and the stone
Process flow: setting out → angle iron base frame welding installation → steel mesh installation → cement sand paddle painting → stone installation → bathtub installation
Process standard description:
(1). The joint of the bathtub and the stone shall be constructed according to the method of pressing the stone on the edge of the bathtub. The stone countertop shall be cut and hollowed and edging according to the size of the bathtub according to the whole piece of stone and installed on site after the completion of the factory processing. The joint between the stone and the bathtub shall be closed with weather-resistant glue.
(2). Use 4*4 galvanized angle steel support frame for the stone parts around the bathtub, install the stone after painting with steel wire mesh cement sand paddle, and leave a hidden stone maintenance door. The specifications and direction of the access door must meet the maintenance requirements.
Process 3: The construction process of the bathtub and the stone joints according to the stone pressure bathtub
Process flow: setting out → angle iron base frame welding installation → steel mesh installation → cement sand paddle painting → bathtub installation → stone installation → plate seam treatment
Process standard description:
(1). The joint of the bathtub and the stone shall be constructed according to the method of pressing the stone on the bathtub. The stone countertop shall be cut and hollowed out according to the size of the bathtub and installed in the factory after the processing is completed. The joint between the stone and the bathtub shall be closed with weather-resistant glue.
(2). Make 4*4 galvanized angle steel support frame for the stone parts around the bathtub, install the stone after painting with steel wire mesh cement sand paddle, and leave a hidden stone maintenance door. The specifications and direction of the access door must meet the maintenance requirements.