Stone mosaic is widely used in the decoration of floors, walls, countertops, etc. in modern architecture. With its natural beauty (color, texture, material) and people's artistic ideas, it "spells" exquisite patterns. . However, before the stone parquet processing, the selection of parquet materials is an important link. Then, how to choose the stone parquet materials? Next, let's talk with the editor of FABULOUS Group.
1, texture
In the processing of stone parquet, the texture change of the board surface is also very important. This is especially true for high-end products with high quality, high requirements and high artistic quality. The best texture change should be combined with the design, so as to better show the effect of the design. The specific texture direction depends on the specific situation, there is no absolute standard to refer to.
Generally, for circular mosaics, the pattern can go around the circumference or along the radius. However, whether it is around the circumference or along the radius, the consistency of the pattern must be ensured. For square mosaics, the general pattern of the pattern extends along the length direction, and can also radiate along the width direction, or change along the length and width directions at the same time.
No matter how the texture is positioned, the key point is how to achieve the design and decorative effect of the stone mosaic, and the best decorative effect of the mosaic shall prevail.
2, color lines, stains, cracks, holes, sand holes, mildew
In terms of the quality of parquet, these stone defects are absolutely not allowed. But because stone is naturally generated, there are sometimes no ways to control it. , So many stones have certain flaws more or less.
Therefore, when we select and use materials, we must also consider these issues comprehensively, avoid what can be avoided as much as possible, and what cannot be avoided depends on the specific situation. And should repair these appearance defects as much as possible. However, the allowable range of blemishes cannot affect the overall decorative effect of the mosaic.
At the same time, since most of the stone mosaics are made up of small pieces of components, they can make full use of the leftover materials from the production of natural stone slabs for processing, but the premise must meet the previous material selection standards.
3, color
In the entire mosaic pattern, the layout color of the same stone must be the same, but for some color differences (sago, golden fragrant jade, Shanhu red and other marbles), there are large color differences on the same board. Time to distinguish and plan well.
The basic principles of material selection are: first, the color selection is based on the principle of gradual transition, and the second is the principle of not affecting the aesthetic decoration effect of the mosaic.
If the board surface effect is too poor to achieve a good decorative effect or the customer's processing requirements, it is best to obtain the customer's consent before processing.