After the marble is laid, it still needs to be treated with a caulking agent. Because marble is more expensive, many construction workers dare not to caulk the marble for fear that it will ruin the marble paving effect. So, how should the marble caulk be used? Today, let's take a look with the editor of FABULOUS Group.
1. Wet the base surface of the wall with clean water first, and use it as an adhesive when there is no water on the surface.
2. After the marble is pasted within the specified time, slightly twist and rub the marble up and down when pasting, or tap gently with a mallet to make the marble and the adhesive adhere closely.
3. Correct the joints between the level and the adjacent plates. Note that 2mm or more joints should be reserved between the marbles.
4. Preliminarily clean the dirt attached to the surface of the board. After the marble has been pasted, it can be cleaned and caulked for 3 days. When caulking the joints, use a special filler for artificial marble.
5. After the caulking treatment, clean the caulking material and dirt attached to the surface of the board in time.
6. After the marble is laid, the protective film can be torn off after acceptance and cleaning.
7. It is recommended not to use traditional marble wet hanging construction.