Marble is a relatively expensive building material, and everyone should pay attention when using it. But there are some unavoidable situations in life. For example, accidentally getting oil stains on the stone surface. This kind of stain is difficult to remove, and it is not enough to wipe it with a paper towel or cloth. So, how to clean up the oil on the surface of marble stone? Today, let's take a look with Jiahao editor.
Preliminary cleaning: Preliminary and comprehensive cleaning can help identify the contaminated area. Use a neutral cleaning agent with a PH value of 7-8.5 to avoid any possible corrosion or color on granite, cement grout joints and adjacent areas Variety. Use a frictionless brush or cotton pad when cleaning. Note: Products that are harmful to the stone should be paid special attention to safety.
Chemical cleaning: When the surface is dry, the oil stains will appear as dark stains. Since stain removal is a process of continuous trials and repetition, we believe that the first step is to directly apply chemical agents (decontamination dewax agent or degreasing agent) on Contaminated place. Follow the manufacturer's instructions to use the medicine to ensure the best results.
The temperature required for the scavenger is between 15 and 27 degrees Celsius. When cleaning, keep the surface moist, let the scavenger fully penetrate into the stone, and react for several hours to absorb the pollution to the surface. If necessary, repeat it again. If the effect is still not satisfactory, Poultice is recommended.
Poultice removal: Poultice removal refers to the adsorption of stains into the poultice. To improve the effect, different scavengers can be added to the paste. Soak the contaminated area first, then apply the medicine paste, cover it with a layer of plastic cloth, and then cut some cracks in the plastic cloth, let the medicine paste dry, and the stains can be absorbed. The entire adsorption and drying process can be controlled within 1-24 hours. Using medicated paste is an effective way.