When we decorate houses, we will encounter stone decoration, such as floor, countertop, etc. There are many types of stone, but no matter what kind of stone, it needs daily maintenance, and maintenance will use wax. Today, let’s take a look at the stone waxing method.
1. Sort waste and debris on the ground and erect construction signs. Use diluted neutral detergent to scrub the stains on the floor. The stains that are difficult to eradicate can be scrubbed with satisfied water. In order to prevent the detergent from accumulating in the groove, the cloth soaked with detergent should be wringed out as much as possible. Floor wax eradication agent will cause stains and swelling on the floor, so it must not be used.
2. Use a neutral detergent to cooperate with the scrubber to clean the ground. Use a wrung cloth to scrub. The surface of the floor is especially grooved, so you should scrub it carefully without leaving any detergent. Residual detergent and moisture will cause whitening and swelling.
3. Wipe the ground dry with a dry towel or wait for it to dry naturally. The surface of the floor and the grooves are completely dry and can be waxed after the moisture is completely dry. Depending on the time of day, changes occur at the required time, but it takes more than half a moment. If it is not sufficiently dry, the floor wax will not adhere closely to the surface of the floor, affect the beauty, and cause a whitening scene.
4. After the ground is dry, wax the surface evenly. Shake the container containing the floor wax and mix it well. Follow the direction of the wood grain of the floor carefully, and don't miss the coating or uneven thickness. Too little correction will cause uneven density, and too much correction will result in poor film formation. Insist on uniform thickness is the key to waxing. Do not dilute the floor wax with water. The waxing tool can use a special mop for waxing, which is simple in operation and has aspirations.
5. After the wax surface is completely dry, the professional can use a high-speed polishing machine to work with the polishing pad to polish it at a constant speed until the surface is bright.
6. The ground after waxing and polishing has regular brightness and excellent sensory effect. Please do not walk on the floor before the floor wax is dry. Boring usually takes 20 minutes to 1 hour. If there is any missing coating, make up coating. If the method of waxing twice is used, and the second time of alteration, it should be done after the first time is completely dry. Wax every 6 months or so, and can keep the floor beautiful for a long time.