The seams, cracks, defective surfaces and holes of stone are the problems that arise after long-term use of marble and various stones. So, how to repair the stone after the above problems occur? Let's take a look at the editor with Jiahao.
1, repair the stitching
Some stones will have seams during the laying process. If the seams between the stone and the stone are not strictly treated, it is inevitable that a black seam will be formed between the stone and the stone. The black seam must be made before renovation. Clean the black seams with a needle, a blade or a seam slitting machine, and then use a vacuum cleaner to clean the dirt in the black seams, and finally use viscose glue to adjust the color close to stone to fill in all the seams (a little higher than 0.2mm of stone) .
2, repair cracks
Cracks are also one of the problems that may occur after long-term use of stone. To repair marble cracks, you must first clean up the dirt in the cracks, then use a vacuum cleaner to absorb the dust in the cracks, and finally use crack repair glue to correct Cracks are repaired.
3, repair the defect surface
After long-term use of marble stone, it is inevitable that some defects will appear. Before repairing the defect surface of the marble, the defect must be cleaned up and the dust must be vacuumed up, and then the discarded stone of the same quality must be cleaned up. Cut into the size of the defect part, seal it, and then polish it.
4. Repair the hole surface
Stone holes are also a defect part formed after long-term use of stone. Of course, the holes must be cleaned before the marble hole is repaired, and then use a vacuum cleaner to absorb the dust, and then use the discarded stone of the same quality to mash it. The discarded stone must also be Clean it up and mix it with resin glue for filling. The filling is slightly higher than the stone surface 3~4mm. After the resin glue is completely dry, use a polisher to polish it and wait for renovation.