People who don’t know about stone renovation or crystal faces don’t know how to operate marble crystal faces. Because they don’t know, they think stone renovation is a simple matter. In fact, it is not. Next, the editor of FABULOUS Group will take you here. Understand how to deal with the crystal face of marble.
1. In the choice of processing machinery, be sure to choose a crystal surface processing machinery with sufficient weight. If the floor brushing machine is used, its weight will not meet the requirements, and the marble floor cannot be refurbished. Moreover, the motor is not so good. In the process of processing the marble crystal surface, the motor is required to rotate for a long time. If it is other machines, the motor cannot withstand the long-term rotation and is easy to break.
2. The day before hardening, the part that will be crystal-faced should be cleaned as much as possible. It is best to thoroughly clean the marble floor and keep it dry, so as not to affect the treatment effect of the next day. .
3. After choosing a machine with a crystal face, you must have an understanding of the machine's power and other indicators, so that you can choose a suitable machine. In addition, you usually find a skilled manual to operate, so you are more familiar with the ratio of various potions. In order to achieve the best crystal face effect.
4. Before using the treatment agent, shake it a few times like before drinking milk to stir the liquid evenly. During the operation, it must be dust-proof and sand-proof to prevent foreign matter that affects the crystal surface from entering workplace.
5. After the marble floor is cleaned, the first thing to do is to evenly spray the crystal surface treatment agent on the stone floor by hand, use a crystal surface treatment machine with a cotton pad, and apply the crystal surface over and over again. Spread the treatment agent evenly on the ground until the crystal surface treatment agent is dry and the reflection and brightness can be seen, then stop the operation.
6. Then, it is necessary to apply the brightening agent to the ground as in the previous step. This brightening agent plays a role of brightening and enhancing, making the ground more shiny and beautiful.
The final step is to continue to spray the crystal surface treatment agent again until the ground is shining. This procedure is to ensure that the crystal surface treatment is performed once, so that the marble can maintain the bright effect for a long time after renovation.